TASCAM | US-2x2HR • Interfaccia Audio USB High Resolution • 2 IN/2 OUT con I/O MIDI

High-Resolution USB Audio/MIDI Interface (2 in, 2 out)

Codice Prodotto: US-2x2HR

€ 148,00
Disponibilità Pronta Consegna
Condizione: Nuovo
Proponi una permuta

Dettagli

Audio resolution Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Quantization bit depth 24-bit Analogue inputs Mic inputs (balanced) XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD) Input impedance 2.2 kΩ Rated input level –7 dBu (0.346 Vrms) Maximum input level +9 dBu (2.183 Vrms) Gain range 56 dB Instrument inputs (unbalanced, MIC/LINE INST switch set to INST) 6.3-mm standard TS stereo jacks (Tip: HOT, Sleeve: GND) Input impedance ≥1 MΩ Rated input level –6 dBV (0.501 Vrms) Maximum input level +10 dBV (3.162 Vrms) Gain range 56 dB Line inputs (balanced, MIC/LINE INST switch set to MIC/LINE) 6.3-mm standard TRS stereo jack (Tip: HOT, Ring: COLD, Sleeve: GND) Input impedance 10 kΩ Rated input level +4 dBu (1.228 Vrms) Maximum input level +20 dBu (7.75 Vrms) Gain range 56 dB Analogue outputs Line outputs (balanced) 6.3-mm standard TRS stereo jacks (Tip: HOT, Ring: COLD, Sleeve: GND) Output impedance 210 Ω Rated output level +4 dBu (1.228 Vrms) Maximum output level +20 dBu (7.746 Vrms) Headphone output (PHONES) 6.3-mm standard stereo jack Maximum output power 18 mW + 18 mW or higher (THD+N 0.1% or less, into 32 Ω load) Control inputs/outputs MIDI IN connector 5-pin DIN Format MIDI standard MIDI OUT connector 5-pin DIN Format MIDI standard USB 4-pin USB, Type C Transfer rate USB 2.0 High Speed (480 MBit/s) Audio performance Mic amp EIN (equivalent input noise) ≤−128 dBu (150 Ω termination, GAIN knob at maximum) Frequency response, MIC/LINE input 44.1 kHz / 48 kHz 20 Hz – 20 kHz, +0 dB/−0.4 dB (JEITA) 88.2 kHz / 96 kHz 20 Hz – 40 kHz, +0 dB/−0.4 dB (JEITA) Frequency response, LINE output 44.1 kHz / 48 kHz 20 Hz – 20 kHz, +0.2 dB/−0.1 dB (JEITA) 88.2 kHz / 96 kHz 20 Hz – 40 kHz, +0.2 dB/−0.4 dB (JEITA) S/N ratio 110 dB (MIC input, GAIN knob at minimum, 20-kHz SPCL LPF, A-weighted) 108 dB (LINE input, GAIN knob at minimum, 20-kHz SPCL LPF, A-weighted) 110 dB (LINE output, LINE OUT knob at maximum, 20-kHz SPCL LPF, A-weighted) Distortion (THD+N) 0.0013 % (MIC IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL LPF) 0.0011 % (LINE IN, 1 kHz sine wave, −5 dBFS input, GAIN knob at minimum, 20 kHz SPCL LPF) 0.0012 % (LINE OUT, 1 kHz sine wave, −4 dBFS input, LINE OUT knob at maximum, 20 kHz SPCL LPF) Crosstalk attenuation ≥95 dB (MIC/LINE input to LINE output, 1 kHz sine wave, GAIN knob at minimum) Computer system requirements Windows Computer hardware requirements Windows computer with a USB 2.0 port CPU/processor speed 2 GHz or faster dual core processor (x86) Memory 2 GB or more Important: Operation of this unit was confirmed using standard computers that meet the above requirements. This does not guarantee operation with all computers that meet the above requirements. Even computers that meet the same system requirements might have processing capabilities that differ according to their settings and other operating conditions Supported audio drivers ASIO2.0, WDM, MIDI macOS CPU/processor speed 2 GHz or faster dual core processor Memory 2 GB or more Supported audio drivers Core Audio, Core MIDI iOS Supported audio drivers Core Audio Important: To connect an iOS device that has a Lightning connector, a genuine Apple Lightning to USB Camera Adapter (sold separately) is necessary. Power supply and other specifications Power supply When used with a computer USB bus power or dedicated AC adapter below When used with an iOS device Dedicated AC adapter (Tascam PS-P520U, DC 5 V) Power consumption 1.75 W External dimensions (W × H × D, including protrusions) 186 mm × 65 mm × 160 mm Weight 1.1 kg Operating temperature range 5–35 °C

Ulteriori informazioni

Marchi TASCAM
Condizioni Nuovo
Spedito Gratis No

Scrivi la tua recensione

Ogni utente registrato può scrivere una recensione. Per favore, accedi o registrati

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.

[profiler]
Memory usage: real: 28049408, emalloc: 26967272
Code ProfilerTimeCntEmallocRealMem